The aspiration to be a professional in sewing job doesn’t always require college degree. Before being expert of a machine, you need to understand every part’s contribution in sewing, the functions and the maintenance course of action.
If you find these components complex if you are unaware about the usage. In bellow you will discover the plot to become sewing expert.
Know the tools of the machine
If you go to war with a gun and if you don’t know how to fire, load and reload bullets, you will not survive. It’s like fighting a war blindfolded your hands tied behind. Knowing all the parts of the sewing machine will enhance your skills to complete the job effectively and efficiently.
If you fail to identify the functions of the bobbin, you could ruin the art. There are several parts of the machine in which some are most important.
Thread Guidance and Tools
The very first important part of the machine is the spool pin. The basic function of this tool is to hold the spool of thread. You also need to understand the instruction printed over the machine is to thread direction from spool pin to the bobbin winder.
The bobbin winder
Besides the roll pin, there is another plastic metal pin through which the bobbin can be winded with full thread.
Adjustment button for stitching
It’s normally a small round wheel and placed in the front of the machine. The major function of this wheel is to fix the stitching direction and the length of the stitch. You can sew forward or reverse it with its help. Reading the user manual would be best before handling this tool.
The thread take-up lever
You will find this lever on the front side and the top over the needle paddle. Before threading the needle, the thread will go through this lever so that it can pull the thread after each stitch. You shall understand the direction printed for this lever.
Tension dial
It is another wheel that controls the tension of the thread. Loosing this tension will loop the thread at the bottom of the fabric and if the tension is tight, the needle will pull to the right.
Pressure foot
Before sewing, you need to pull the lever down to hold the fabric. It was found at the under the under the needle clamp screw.
Bobbin compartment and placing
Just below the needle, there is a small compartment in which you need to keep the bobbin and pull the edge of the thread by a round dial/wheel towards you for few times.
Inserting needle
You also need to learn how to insert the needle and while installing make sure that the groove must face the direction from which the needle is threaded.
Follow This Article: Using 3 Sewing Skill Strategies Like a Pro.
Sewing the machine
After selecting the stitch length practice on the scrap to see if everything is perfect or not. And then you should place the stitching line just under the needle and pull the needle lever down so that the needle paddle holds the fabric. After starting stitching hold the thread for a while until you catch the pace and line of stitch.
It’s very important to understand the functional part of the swing machine and how you can take necessary actions when any uneven stitching situation arises. These skills will lead you to become proficient in sewing.
To Know More About Sewing Toolkits, Check Out: 5 Sewing Toolkits You Need for Like a Professional Sewing Master.